Makita 18V Brushless Combo Kit – 8 Piece DLX8046TX1

18V Brushless Heavy Duty Hammer Driver Drill DHP486Z

• Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity 
• Compact overall length only 178mm for use in narrow work spaces
• High powered Brushless Motor produces 141Nm peak torque 
• High durability aluminium gear housing 
• Mechanical 2 speed gearing with all metal gear construction

Impact Rate:
    Hi: 0 – 31,500ipm
    Lo: 0 – 8,250ipm
Max. drilling capacities in masonry: 16mm
Max. drilling capacities in steel: 13mm
Max. drilling capacities in wood:
    Auger bit: 50mm
    Self-feeding bit: 76mm
    Hole saw: 152mm
Max. lock torque: 125Nm
Max. tightening torque:
    Hard: 130Nm
    Soft: 65Nm
No Load Speed:
    Hi: 0 – 2,100rpm
    Lo: 0 – 550rpm
Skin weight: 2.1kg
Voltage: 18V
Weight (with battery): 2.1kg

18V Brushless 3-Stage Impact Driver DTD154Z

• 4 Modes of impact driving optimised for the task at hand
• T-Mode intelligently adjusts rpm when driving tek screws
• Staggering 175Nm of max fastening torque
• XPT technology that protects against dust & moisture
• One touch bit installation

Drive Shank: 6.35mm (1/4″) Hex
Impact Rate:
    Hard: 0 – 3,800ipm
    Med: 0 – 2,600ipm
    Soft: 0 – 1,100ipm
Max. capacities high tensile bolt: M5 -M14
Max. capacities standard bolt: M5 -M16
Max. tightening torque: 175Nm
No Load Speed:
    Hard: 0 – 3,600rpm
    Med: 0 – 2,100rpm
    Soft: 0 – 1,100rpm
Overall Length: 117mm
Skin weight: 0.9kg
Voltage: 18V
Weight (with battery): 1.5kg

18V Brushless 125mm Slide Switch Angle Grinder DGA504Z

• Kickback detection, anti-restart and soft start
• Automatic Torque Drive increases torque to power through any cut
• Extreme performance with 8,500rpm no load speed
• XPT technology that protects against dust & moisture
• Electronic current limiter

No Load Speed: 8,500rpm
Overall Length: 362mm
Skin weight: 2.0kg
Voltage: 18V
Weight (with battery): 2.6kg
Wheel diameter: 125mm (5″)

18V Brushless 165mm  DHS680Z

• Max cut capacity of 57mm with up to 50° bevel capacity
• Automatic Torque Drive increases torque to power through any cut
• High cutting performance with up to 5,000rpm no load speed
• Electric brake rapidly slows the blade for added safety
• Blower function blows dust away from cut line for greater visibility

Bevel Capacity: 0°- 50°
Blade Diameter: 165mm (6-1/2″)
Bore Diameter: 20mm
Max. cutting capacities at 0°: 57mm
Max. cutting capacities at 45°: 41mm
Max. cutting capacities at 50°: 37mm
No Load Speed: 5,000rpm
Overall Length: 350mm
Skin weight: 2.7kg
Voltage: 18V
Weight (with battery): 3.3kg

18V Brushless 24mm SDS Plus Rotary Hammer DHR242Z

• 3 Mode operation: hammer only, rotation only, rotation & hammer
• Unique rubber joint suppresses vibration to battery
• 2.0j of impact energy

* Rating in accordance with EPTA 05/2009

Impact energy: 2.0j
Impact Rate: 0 – 4,700ipm
Max. drilling capacities in masonry: 24mm
Max. drilling capacities in steel: 13mm
Max. drilling capacities in wood: 27mm
No Load Speed: 0 – 950rpm
Overall Length: 328mm
Skin weight: 2.7kg
Vibration per min: 13.5m/s²
Voltage: 18V
Weight (with battery): 3.3kg

18V Brushless Recipro Saw DJR187Z

• 32mm stroke with a cutting capacity of 255mm in wood
• Newly designed vertical crank mechanism reduces vibration
• High performance 3,000spm no load speed
• Rafter hanging hook for added convenience
• XPT technology that protects against dust & moisture

Length of Stroke: 32mm
Max. cutting capacities in pipe: ø 130mm
Max. cutting capacities in wood: 255mm
Overall Length: 439mm
Skin weight: 3.1kg
Strokes per minute:
    Hi: 0 – 3,000spm
    Lo: 0 – 2,300spm
Voltage: 18V
Weight (with battery): 3.7kg

Bluetooth DMR108N

• Compact design with IP64 rating ideal for job site conditions
• Bluetooth for streaming audio and foldable antenna for radio
• 2 x large 89mm speakers provide 3.5W x 2 high quality audio
• USB Ports for charging mobile devices
• Foldable antenna that folds away in line with the body of the radio

* Practical max output when powered by an 18V battery

Continuous Runtime: 6.0Ah – 42hrs
Frequency band: AM: 522 – 1,710kHz / FM: 87.5 – 108MHz
Overall Length: 262mm
Practical max. output: 7.2V:0.5Wx2 / 18V:3.5Wx2
Skin weight: 4.3kg
Voltage: 7.2 – 18V
Weight (with battery): 4.9kg

18V LED Jobsite Torch DML802

• Ergonomic design
• Up to 13hrs on a 3.0Ah battery
• Single 3.2W LED produces 160lm brightness

Continuous Runtime: 3.0Ah – 13hrs
Illuminance: 4,000lx
Luminous flux: 160lm
Overall Length: 273mm
Skin weight: 0.33kg
Voltage: 18V
Weight (with battery): 0.93kg

2 x 5.0Ah Batteries BL1850B

• Fuel gauge indicator, displays charge remaining on battery in four stages
• Built in memory chip communicates the usage history with the charger
• Built in shock absorbers protect the cells from job site conditions
• High energy cells pack more power per cell to reduce the number of cells and overall weight
• Large release button for easy removal from the tool
• Built in air vents and wall cools the battery cells evenly whilst blocking damaging debris
• 16 contact terminals provide consistent power and firm hold in any environment

Dual Port Rapid Charger DC18RD

• Fast charging – charges 2 x 3.0Ah Lithium-Ion batteries at the same time in only 22 minutes
• Built-in CPU – gathers information from the battery’s memory chip to determine the optimum charging method
• Forced air cooling fan – cools the battery to minimise charging time
• LED charging display
• Full charge sound alert
• USB port provides 1.5A output for charging smartphones, tablets, etc

LXT Tool Carry Bag 199936-9

• Wide deep main pocket provides quick tool location & easy access
• Adjustable heavy-duty shoulder belt makes lifting more comfortable
• Metal hooks at the ends to unfasten the belt when not needed
• Handles made of polypropylene tape & foam – Extra comfort 
• L600 x W300 x H300mm
• Weight – 1.9kg

Product Identifiers

Product Details

Product Dimensions

Battery

Warranty & Care