- Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
- Compact overall length only 178mm for use in narrow work spaces
- High powered Brushless Motor produces 141Nm peak torque
- High durability aluminium gear housing
- Mechanical 2 speed gearing with all metal gear construction
Impact Rate:
Hi: 0 – 31,500ipm
Lo: 0 – 8,250ipm
Max. drilling capacities in masonry: 16mm
Max. drilling capacities in steel: 13mm
Max. drilling capacities in wood:
Auger bit: 50mm
Self-feeding bit: 76mm
Hole saw: 152mm
Max. lock torque: 125Nm
Max. tightening torque:
Hard: 130Nm
Soft: 65Nm
No Load Speed:
Hi: 0 – 2,100rpm
Lo: 0 – 550rpm
Skin weight: 2.1kg
Voltage: 18V
Weight (with battery): 2.1kg
18V Brushless 3-Stage Impact Driver DTD154Z
- 4 Modes of impact driving optimised for the task at hand
- T-Mode intelligently adjusts rpm when driving tek screws
- Staggering 175Nm of max fastening torque
- XPT technology that protects against dust & moisture
- One touch bit installation
Drive Shank: 6.35mm(1/4″)Hex
Impact Rate: Hard: 0 – 3,800ipm / Med: 0 – 2,600ipm / Soft: 0 – 1,100ipm
Max. capacities high tensile bolt: M5 -M14
Max. capacities standard bolt: M5 -M16
Max. tightening torque: 175Nm
No Load Speed: Hard: 0 – 3,600rpm / Med: 0 – 2,100rpm / Soft: 0 – 1,100rpm
Overall Length: 117mm
Skin weight: 0.9kg
Voltage: 18V
Weight (with battery): 1.5kg
18V Brushless 125mm Slide Switch Angle Grinder DGA504Z
- Kickback detection, anti-restart and soft start
- Automatic Torque Drive increases torque to power through any cut
- Extreme performance with 8,500rpm no load speed
- XPT technology that protects against dust & moisture
- Electronic current limiter
No Load Speed: 8,500rpm
Overall Length: 362mm
Skin weight: 2.0kg
Voltage: 18V
Weight (with battery): 2.6kg
Wheel diameter: 125mm (5″)
18V Brushless 165mm DHS680Z
- Max cut capacity of 57mm with up to 50° bevel capacity
- Automatic Torque Drive increases torque to power through any cut
- High cutting performance with up to 5,000rpm no load speed
- Electric brake rapidly slows the blade for added safety
- Blower function blows dust away from cut line for greater visibility
Bevel Capacity: 0°- 50°
Blade Diameter: 165mm (6-1/2″)
Bore Diameter: 20mm
Max. cutting capacities at 0°: 57mm
Max. cutting capacities at 45°: 41mm
Max. cutting capacities at 50°: 37mm
No Load Speed: 5,000rpm
Overall Length: 350mm
Skin weight: 2.7kg
Voltage: 18V
Weight (with battery): 3.3kg
18V Brushless 24mm SDS Plus Rotary Hammer DHR242Z
- 3 Mode operation: hammer only, rotation only, rotation & hammer
- Unique rubber joint suppresses vibration to battery
- 2.0j of impact energy
* Rating in accordance with EPTA 05/2009
Impact energy: 2.0j
Impact Rate: 0 – 4,700ipm
Max. drilling capacities in masonry: 24mm
Max. drilling capacities in steel: 13mm
Max. drilling capacities in wood: 27mm
No Load Speed: 0 – 950rpm
Overall Length: 328mm
Skin weight: 2.7kg
Vibration per min: 13.5m/s²
Voltage: 18V
Weight (with battery): 3.3kg
18V Brushless Recipro Saw DJR187Z
- 32mm stroke with a cutting capacity of 255mm in wood
- Newly designed vertical crank mechanism reduces vibration
- High performance 3,000spm no load speed
- Rafter hanging hook for added convenience
- XPT technology that protects against dust & moisture
Length of Stroke: 32mm
Max. cutting capacities in pipe: ø 130mm
Max. cutting capacities in wood: 255mm
Overall Length: 439mm
Skin weight: 3.1kg
Strokes per minute: Hi: 0 – 3,000spm / Lo: 0 – 2,300spm
Voltage: 18V
Weight (with battery): 3.7kg
Bluetooth DMR108N
- Compact design with IP64 rating ideal for job site conditions
- Bluetooth for streaming audio and foldable antenna for radio
- 2 x large 89mm speakers provide 3.5W x 2 high quality audio
- USB Ports for charging mobile devices
- Foldable antenna that folds away in line with the body of the radio
* Practical max output when powered by an 18V battery
Continuous Runtime: 6.0Ah – 42hrs
Frequency band: AM: 522 – 1,710kHz / FM: 87.5 – 108MHz
Overall Length: 262mm
Practical max. output: 7.2V:0.5Wx2 / 18V:3.5Wx2
Skin weight: 4.3kg
Voltage: 7.2 – 18V
Weight (with battery): 4.9kg
18V LED Jobsite Torch DML802
- Ergonomic design
- Up to 13hrs on a 3.0Ah battery
- Single 3.2W LED produces 160lm brightness
Continuous Runtime: 3.0Ah – 13hrs
Illuminance: 4,000lx
Luminous flux: 160lm
Overall Length: 273mm
Skin weight: 0.33kg
Voltage: 18V
Weight (with battery): 0.93kg
2x 6.0Ah Batteries BL1860B
- Fuel gauge indicator, displays charge remaining on battery in four stages
- Built in memory chip communicates the usage history with the charger
- Built in shock absorbers protect the cells from jobsite conditions
- High energy cells pack more power per cell to reduce number of cells and overall weight
- Large release button for easy removal from the tool
- Built in air vents and wall cools the battery cells evenly whilst blocking damaging debris
- 16 contact terminals provide consistent power and firm hold in any environment
Same Time Dual Port Rapid Charger DC18RD
- Fast charging – charges 2 x 3.0Ah Lithium-Ion batteries at the same time in only 22 minutes
- Built-in CPU – gathers information from the battery’s memory chip to determine the optimum charging method
- Forced air cooling fan – cools the battery to minimise charging time
- LED charging display
- Full charge sound alert
- USB port provides 1.5A output for charging smartphones, tablets, etc
Tool Carry Bag 199936-9
- Wide deep main pocket provides quick tool location & easy access
- Adjustable heavy-duty shoulder belt makes lifting more comfortable
- Metal hooks at the ends to unfasten the belt when not needed
- Handles made of polypropylene tape & foam – Extra comfort
- L600 x W300 x H300mm
- Weight – 1.9kg
- IHG SKU
- 6786651
- National SKU
- 804460
- Product Code
- DLX8046GX1
- Barcode
- 0088381744942
- Brand
- Makita
- Weight (kg)
- 28.4
- Height (mm)
- 390
- Width (mm)
- 490
- Length
- 490
- Depth (mm)
- 750
- Battery Type
- Li-Ion
- Battery Voltage
- 18V
- Warranty
- 5 years for skins if registered within 30 days of purchase, 3 years if registered post 30 days, 2 years for batteries & chargers





Reviews
There are no reviews yet.